![Checklist](/service/all-pages/vehicle-inspection-checklist/_jcr_content/root/container/hero.coreimg.png/1712861255858/checklist-icon.png)
Vehicle Inspection Checklist
Before your Drive Test, your car must pass the following checks:
- License Plate - Must have valid license plate.
- Lights - Must have working brakes/turn signals, including the third brake lights (cars since 1986, tricks since 1994). No lens may be covered in any way by tape of any kind, colored or clear.
- Windshield - Cannot have multiple cracks or other damage. Tint must meet Title 47. No tint is permitted more than 5 inches from the windshield or below the AS-1 line located on the windshield.
![AS-1 Line Example](/service/all-pages/vehicle-inspection-checklist/_jcr_content/root/container/container/contentblock_2864968_1376452893.coreimg.jpeg/1712951268486/as-1-line.jpeg)
- Tires - Must have a minimum tread depth 2/32", no ply or cord exposed in the tread. No bulges/bumps. Use the penny test to check depth.
![Penny with "Need New Tires" / "Tires Are Fine"](/service/all-pages/vehicle-inspection-checklist/_jcr_content/root/container/container/contentblock_2864968_156401085.coreimg.jpeg/1712951303613/penny-tires.jpeg)
- Horn - Must be audible at 200 feet.
- Muffler - Cannot be modified from original factory vehicle noise level.
- Brakes - Must be in proper working order.
- Front door handles - Must operate from both inside and outside with normal effort.
- Seatbelts - Must be in proper working order.
- Mirrors - Must be left outside AND either center inside or right outside mirrors.